Diaper bag from Simplicity 2924

I found this pattern pack from Spotlight and love that it comes with so many pattern pieces for 7 items! Yes, 7 - 2 designs diaper bag, baby bib, tummy pillow, burp cloth, changing pad, diaper wipes bag and pacifier clip. Wow!  My sister in law is going to have twin babies come May and I thought a diaper bag will be nice for her.

I bought the floral fabric sometime ago from Spotlight and made a lunch bag from it but the rest of the fabric was sitting in my drawer waiting for another project.  I finally found a baby pink polka dot fabric that match nicely with my floral print.

back view with back pocket

I took some time to plan the construction as I use 2 fabric instead of 1 so need to be sure where each fabric goes.  With the interfacing pieces, it can get confusing.  But I love how it turn out!

The inside of the bag has 4 big elasticized pockets to carry all the necessities for the baby. I just love the beautiful floral print at the base!

The interfacing that I've used are medium weight but I feel that the bag is still too soft and didn't stand up well. I've followed all the steps in the pattern and it was really simple. Instruction is well written and clear.  Minor adjustment made was I cut the fabric to be 1" shorter as the original design was too big.  I also added batting to the strap as I thought it would be more comfortable on the shoulder.

I love the elasticized side pockets that is big enough to contain the water bottles and milk bottles.  I used the  inner fabric for the elastic casing so that it has a contrasting effect. Just need to cut the side pocket piece to be 1" smaller and add in the contrasting strip to be 2" and sew them before you attach the side pocket.

Another view of the side pocket with the big back pocket.

The bag view of the bag with strap.

Sewing Buttons and Buttonholes - A Tutorial

Here's the tutorial on sewing buttons and buttonholes with sewing machine. 

My new tunic needs 5 buttons and 5 buttonholes, so I decided to use the sewing machine for this job to save me some time.  If you have not machine sew your buttons or buttonholes, here some simple steps to guide you on. 

First you need some sewing supplies that comes along with your sewing machine when you first purchase it.  

For the Button: 

Darting plate

Button sewing foot

Darning plate on left and button sewing foot on right

For buttonholes

Buttonhole foot

How to sew a buttonholes

1. You need to make the buttonholes first before you sew the button. So, get your button out and measure the size in diameter.  Mine was 1.5cm.

2. Mark out the buttonholes on the placket.  The buttonholes should be slightly bigger than the button diameter.  I've used 1.8cm here.

3. Attach the buttonhole foot on your sewing machine and mark out the starting point. See picture below on the position of the starting point of the needle with the pressor foot. 

4. Position your needle to the right of the buttonhole marking.  The marking that you've draw should be right in the middle of the window.

    a. Select the stitch option 1 for the buttonhole option and stitch length of less than 1. (this is the 4 step buttonhole option on my Singer sewing machine so find out what's yours and you will be fine)

    b. Start sewing from the right top of the buttonhole mark and stop when you reach the end.

    c. Select the stitch option 2 and sew a sew a few stitch.

    d. Then, switch the dial to stitch option 3 that will see your needle moving up back to the top again.  

    e. When your needle reach the top left hand side of the window, select stitch option 2 again and sew a few stitch again and you are done!

5. Place 2 pins at the start and the end of the buttonholes that you have just sewn.  Using the seam ripper, cut out the fabric in the middle of the 2 sewn lines.  Now do the same for the rest of the buttonholes.

How to sew Buttons

1. Place the placket with the buttonholes over to the other placket and mark out the opening using a water soluble pen.  This will be the position of your buttons. 

2. Attach the darting plate and button sewing foot in. Place the button onto the markings on the placket that you have just made.  

3. Your needle position should be the right side on the stitch dial and try to align the holes on the button to the needle. 

4. Once you have it, change the stitch length to between 1 and 0 and sew a few stitches on the buttonhole to secure the thread in the button.

4. Then, select the zig-zag stitch option that will allows your needle to fit just nicely into the 2nd hole on the left.  You can adjust the zig zag stitch till you get the right fit. Start sewing a few zig zag stitch to secure the button to the placket.  

5. Cut away the thread and you are done! If you have 4 holes on your button like mine, you just have to do the above steps twice.

That's it. Simple right? 

My tunic is now complete, with buttons!

So go...get out the supplies and start sewing!

Butterick 5612 - A Review

I've sewn up a Tunic for myself using Butterick 5612. I  bought the downloaded version from Print2Sew. It is not completed yet since I've not yet sewn on the buttons.

I chose View B but did a few modification.

The fabric is some light weight blue cotton that I bought sometime ago from Fabric.com.  I've chose size 10 for the top and size 12 for waist and hip.  But it was still gaping at the neckline for me so I cut off some length from the neck band before attaching to the neckline.  The instruction for the placket was a bit confusing and the small picture doesn't help too. In the end, I just use my common sense and attach it. Not sure if it's the right method but it works.

In my opinion, the sleeve was also too big and it could use some slimming down. I didn't adjust the sleeve though since I can wear them rolled up.

The casing for the drawstring was quite a hassle so I did away with it and just sew 2 belt loops at the waist area and insert the drawstring through.

Here's the back view of the tunic. The raglan sleeve style tunic is quite nice on me since it is not so form fitting and the drawstring at the waist gives it some shape. I also love the 2 big pockets that is just the right size for me!

In my next post, I'll be sharing a tutorial on sewing on buttons and button holes using the sewing machine.  Stay posted!